The Shimano SH12 SPD-SL Cleat Set Red is perfect if you want absolutely zero float, locking you into a fixed position on the pedals so every ounce of power you put down goes into moving forward.

Shimano makes three different cleats to fit their performance road pedals. You'll know when it's time to replace them when the colored wear-indicator tips are worn out, or when that silky-smooth clipping in-and-out motion gets a little less smooth. Use these with Shimano-brand road pedals only.

The Shimano SH12 SPD-SL Cleat Set Yellow is perfect if you need a the maximum amount of float, making it easier on knees and letting your body find its natural pedal stroke.

Shimano makes three different cleats to fit their performance road pedals. You'll know when it's time to replace them when the colored wear-indicator tips are worn out, or when that silky-smooth clipping in-and-out motion gets a little less smooth. Use these with Shimano-brand road pedals only.

They'll fit 3-bolt road shoes, and come in three styles; the Shimano SH10 SPD-SL Red is fixed—no float, the Shimano SH12 SPD-SL Blue has 2 degrees of float, and the Shimano SH11 SPD-SL Yellow has 6 degrees of float.

The Shimano SH12 SPD-SL Cleat Set Blue is perfect if you need a small amount of float but don't want to waste energy with excess movement.

Shimano makes three different cleats to fit their performance road pedals. You'll know when it's time to replace them when the colored wear-indicator tips are worn out, or when that silky-smooth clipping in-and-out motion gets a little less smooth. Use these with Shimano-brand road pedals only.

They'll fit 3-bolt road shoes, and come in three styles; the Shimano SH10 SPD-SL Red is fixed—no float, the Shimano SH12 SPD-SL Blue has 2 degrees of float, and the Shimano SH11 SPD-SL Yellow has 6 degrees of float.

Single Release cleats for use with all Shimano SPD pedals.
Note - Not compatible with SPD-SL shoes.

SPD multi-release cleats
Allow your show to be disengaged by rolling or twisting the foot in any direction
The cleat will even release with sufficiently hard (and considerable) upward force, minimising the risk of toppling over with both feet still clipped in
Designed to work with all open design pedals

Replacement Shimano SH-70 cleats for Dura-Ace, Ultegra PD-7410 and 6500 pedals.
Gray, 0 degrees of float
Pair
For 7410 / 6500 pedals

Shimano SH71 SPD Cleats are 2-bolt road SPD cleats with rotational retention and 8 degrees of float. Recommended for use with the older Dura-Ace 7410 and Ultegra 6500 SPD pedals.

Key Features
Material: Polyoxymethylene and TPU
Angular float: 0°
Adjustment
lateral: 4mm
longitude: 12mm
Weight: 68g (pair with bolts)
Includes: 6 bolts & 6 washers

Key Features
Material: Polyoxymethylene and TPU
Angular float: 9°
Adjustment
lateral: 4mm
longitude: 12mm
Weight: 68g (pair with bolts)
Includes: 6 bolts & 6 washers

Key Features
Material: Polyoxymethylene and TPU
Angular float: 4.5°
Adjustment
lateral: 4mm
longitude: 12mm
Weight: 68g (pair with bolts)
Includes: 6 bolts & 6 washers