Headsets / Bearings

  • Chris King 1 Inch No ThreadSet All
    Chris King Precision Components was one of the first bicycle component manufacturers to offer a threadless headset.
    NZ$257.00
    NZ$250.00
  • Chris King 2 Nut and Grip Nut Threaded Headset
    For 14 years, if you bought a Chris King headset, you bought one of these. Chris' early reputation was built on this traditional style headset.
    NZ$257.00
    NZ$250.00
  • Chris King Inset 1 1/8 - Model 1 - ALL
    InSet is the classic, unbeatable Chris King sealed bearing headset built into five configurations for contemporary bicycle headtube dimensions.
    NZ$265.99
    NZ$260.00
  • Chris King Inset Taped MODEL 2  ALL
    DESCRIPTION AND FEATURES
    Tapered Internal style headset for tapered steerers and tapered head tubes

    55.95 Lower Fitting
    44.0 Upper fitting

    Tapered steerer, or with purchase of a devolution crown race, can be used with a 1 1/8 steerer
    NZ$290.00
  • Chris King Inset Tapered MODEL 3  ALL
    For Tapered headtubes, External lower cup can be used with either tapered steerers or with the purchase of a devolution baseplate, can be used with 1 1/8 steerers.
    NZ$290.00
  • Chris King Inset 49mm Model 4 All
    InSet is the classic, unbeatable Chris King sealed bearing headset built into five configurations for contemporary bicycle headtube dimensions.
    NZ$290.00
  • Chris King Inset 49mm - Model 5 - All
    Tapered steerer (or 1 1/8 steerer with devolution baseplate) reducer flush fitting top headset, with external lower cup for use in one point five headtubes.
    NZ$290.00
  • Chris King Inset Inset 44mm External - Model 7
    Designed to allow the use of a tapered steerer tube in a 44mm (internal headtube)
    NZ$290.00
    NZ$280.00
  • Chris King No Thread Set 1/18 Headset Sotto Voce
    Chris King Precision Components was one of the first bicycle component manufacturers to offer a threadless headset.
    NZ$265.99
    NZ$260.00
  • Chris King No ThreadSet Headset 1/18 Bold Logo
    Chris King Precision Components was one of the first bicycle component manufacturers to offer a threadless headset.
    NZ$265.99
    NZ$260.00
  • Chris King Stem Cap Bold
    Chris King stem caps are precision machined, like all Chris King components, of course.
    NZ$24.99
  • Chris King Headset Base Plates
    To many, this is commonly called a crown race. We choose to call it a baseplate as ours is technically not a race. It is the foundation of the venerable Chris King Sealed Bearing headset and is designed as a low cost, sacrificial piece, easily replaced when worn or damaged upon removal. Occasionally, it’s nice to start with a fresh one - here’s where you’ll find them.
    NZ$45.00
  • Spank Tweet Tweet Headset Spacers
    6061 ALLOY
    THICKNESS: 3MM / 6MM / 12MM PER PACK
    FOR 1-1/8” (Ø28.6) STEERING TUBE
    BRUSHED DEEP ANODIZED
    NZ$11.99
    NZ$9.99
Top
Physical Address
127 Queens Drive
Lower Hutt
New Zealand
Postal Address
127 Queens Drive
Lower Hutt
New Zealand


Web Address
https://www.cyclescience.co.nz

Phone Number
Ph:04 589 2822
Mob: