Freewheel & Crank Tools

Wellingtons premier online bike store Cycle Science has great range of Freewheel & Crank Tools for you at home to get small jobs done with brands like BBB, Park Tools, Lezyne, Giant, Specialized, Phillips, Shimano, Sram
  • BBB Crank Pulley PowerPull
    Separates the crank from the bike's bottom bracket. It has a dual function removeable cap, that's why the pulley can be used on all over-sized spindles, while without the cap, the tool can be used on all standard spindles.
    NZ$ 24.99
    NZ$ 22.49
  • Park Tool Crank Puller For Splined Cranks
    The CCP-44 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks.
    NZ$ 39.99
    NZ$ 34.99
  • Park Tool Crank Wrench
    The CCW-5 features both a 14mm. socket and 8mm. hex wrench on a long, comfortable handle.
    NZ$ 24.99
    NZ$ 22.49
  • Park Tool FR-1.3 Freewheel Remover For Multiple Brands
    12 splines, 22.6mm diameter fits Shimano®, Sachs® Aris, Sun Race®, DNP® Epoch and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
    NZ$ 19.99
    NZ$ 17.99
  • Park Tool Standard Cotterless Crank Puller
    The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks.
    NZ$ 39.99
    NZ$ 36.00
  • Park Tools Freewheel Remover- for 4 Notch BMX freewheels FR 8
    FR-8 - FREEWHEEL REMOVER FOR 4 NOTCH BMX FREEWHEELS
    Removes four-notch freewheels from "flip-flop" BMX hubs with 30 x 1mm threads. One-inch base to fit end of SR-1, FRW-1, adjustable wrench or bench vise.
    NZ$ 34.99
    NZ$ 31.49
  • Park Tools Freewheel Remover- for BMX freewheels FR6
    FR-6 - FREEWHEEL REMOVER FOR BMX FREEWHEELS
    The FR-6 Freewheel remover is designed to remove the four-notch freewheels from BMX and single speed bikes using the standard 1.37 x 24 tpi hub threading. Always hold the remover secure to the hub using axle nut or quick release skewer.
    NZ$ 34.99
    NZ$ 31.49
  • Park Tools Universal Crank Puller
    The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7 is made for the 22 x 1mm threading in the common cranks.
    NZ$ 34.99
    NZ$ 31.49
Top
Physical Address
127 Queens Drive
Lower Hutt
New Zealand
Postal Address
127 Queens Drive
Lower Hutt
New Zealand

Web Address
https://www.cyclescience.co.nz

Connect
Phone:04 589 2822