PARK TOOL - 758.2 - REAMING & FACING CUTTER FOR 1.5” HEADSET FOR HTR-1&1B
The Park Tool 758.2 will ream and face the head tubes of the bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750 Centering Cone Adaptor.
- 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
- Bores a machined surface to a depth of approximately 25mm and then faces top of headtube surface
SHIS terminology: The 758.2 is for EC49 upper and lower headtubes. Note: Always use cutting fluid such as Park Tool CF-2 when machining.
*Specifications are subject to change. Please read our Terms & Conditions
*Giant & Liv Bicycles are available for purchase online, but due to warranty regulations, must be shipped to qualified Giant dealers, as bicycles must be assembled by a qualified bike mechanic in an approved store - This is an international policy and usually will require an additional fee to build the bike. This will be confirmed by one of our online staff after purchase of the bike.