2 in 1 Pocket Spoke and Cassette Lockring Tool
- Material: special tool steel, hardened and tempered
- Surface finish: blacken to standard DIN 50938
The wrench is the basic working tool for cyclists extended tours.
To change broken spokes on the right side of the rear wheel, the cassette has to be removed first.
Firstly remove the rear wheel, than fit the tool onto the freewheel nut. Replace the rear wheel, so that the square edge of the tool presses to the frame or derailleur hanger. After that, push the pedals in the forward direction and loosen the freewheel nut. Remove the cassette and replace the broken spoke. In order to prevent the possibility that the paint on the bicycle frame is damaged, a protective plastic plate should be inserted between the key and the frame.
*Specifications are subject to change. Please read our Terms & Conditions
*Giant & Liv Bicycles are available for purchase online, but due to warranty regulations, must be shipped to qualified Giant dealers, as bicycles must be assembled by a qualified bike mechanic in an approved store - this is an international policy.